Kirk McDonald's photo safari of his stay at CERN during the solenoid surface test:
2nd-5th April 07
Some photos of activity at CERN the week are at http://www.hep.princeton.edu/~mcdonald/mumu/target/apr0507/
Magnet-related photos include
shows the deflection of the inner coil leads.
Harold Kirk, Alan Bross and the DVB
the Cryocomp v2000 pressure relief valve + valve operator http://www.hep.princeton.edu/~mcdonald/mumu/target/apr0507/Picture075.jpg
after the valve operator has been removed.
The set of 3 3/4" pressure relief valves attached to the spare conflat flange on the magnet
The gas inlet for the pressure test is attached to the lowest conflat.
shows the "shorting cable" that has about 400 MOhm to ground.
The LN2 heater during cryo tests
The dummy load during cryo tests
magnet at 4 bar, Thu morning.